SV vs CTD

Why Your Sound Speed Measurement Method Matters

By: Jehan Zouak, Marketing Manager & Chris Bueley, VP of Projects & Services - AML Oceanographic

It’s an age old question (Okay, maybe not that old): Should I collect sound speed data for my hydrographic survey with a CTD or a Sound Velocity (SV) profiler? What’s the difference?

How does a CTD profiler measure sound velocity?

A CTD profiler measures three parameters: conductivity, temperature, and pressure (depth). These parameters are considered fundamental because they form the foundation upon which seawater can be characterized.

Measurement of these parameters enables the calculation of a host of characteristics, most notably density and salinity. Another quality that can be obtained from conductivity, temperature, and pressure data is sound speed which is calculated through an empirically derived formula.

EMPIRICALLY DERIVED FORMULA

An empirically derived formula is created from correlations observed in data rather than from proven theoretical derivations.

How does a SV profiler measure sound velocity?

AML Oceanographic (then Applied Microsystems Ltd.) released the first time-of-flight (TOF) sound velocity sensor in 1995. Unlike CTDs, which rely on an empirically derived formula to calculate sound speed, the measurement methodology of a TOF sound velocity sensor is based on physics and first principles. TOF sound velocity sensors have improved in form and function over the years, but the core physics behind the technology remain the same. 

To measure sound speed, the sensors time an acoustic pulse as it transits a known, fixed distance. Speed of sound in seawater (or in any fluid) is then determined just as one would calculate the average speed of your morning run: speed = distance/time.

FIRST PRINCIPLES

First principles are theories supported by established science. Associations are made through derivations rather than assumptions made through observations as they are in empirically derived formulas.

Here’s how you’d determine speed on a morning run:


And here’s how you’d measure sound speed using the same principles on a TOF sensor:

You’ll notice that the only value being measured is time; not conductivity, not temperature, not pressure. The sensor relies on first principles rather than an empirically derived formula. For this reason, TOF sensors are fluid agnostic – they work in any liquid be it orange juice, tomato soup, or vodka (Yes, we’ve tried this). 

Which is more accurate?

CTD-derived sound speed measurements have four primary sources of error. The individual measurements of conductivity, temperature, and pressure (depth) each have respective error margins. Those inaccuracies, combined with the limitations of the empirically derived formulas used to calculate sound speed from CTD data, result in a generally agreed upon accuracy limitation of 0.25 m/s. In addition to having their own accuracy specifications, each parameter has a different response time which can further exacerbate the issue.

TYPICAL CTD ERROR MARGINS

A: Conductivity measurement = 0.003 mS/cm

B: Temperature measurement = 0.005 °C

C: Pressure measurement = 0.05 %FS

D: CT&P conversion to Salinity = 0.01 ppt

E: CTD-derived Sound Velocity accuracy = 0.25 m/s

Sound velocity sensors measure directly, rather than an amalgamation of different measurements. If you remember from the previous section, sound velocity sensors use a basic distance/time relation to calculate speed. This relation assumes of course, that total distance is known.

It should be noted that the total path length of a given sensor is not known at the time of manufacture. For a sensor to produce accurate results, the path length must be known to an extremely high accuracy; an accuracy which cannot be achieved by direct ruler measurement. To put this into context, a path length measurement error on the order of half the width of a human hair would yield a sound velocity measurement error well beyond the sensor’s accuracy specification.


Ruler measurement won't cut it when tolerance
is less than half the width of a human hair.

It's all about the calibration.

The path length of a given sensor is determined during its calibration process. Calibration is done by submerging the sensor in a fluid in which sound speed is known to a very high accuracy, referred to as a reference fluid. In our case, the reference fluid is distilled water. We use distilled water because the relationship between sound speed and temperature is described to a very high accuracy by the work of Bilaniuk and Wong2. With baths of distilled water at a known pressure, sound velocity can easily be calculated as a function of temperature. With this process, we back-calculate the path length. This provides the unique path length for each sensor which is then programmed into the sensor’s memory.

The accuracy of modern time-of-flight sound velocity sensors is limited largely by the available reference fluids. The best equation to date yields an SV reference accuracy of 0.02 m/s2. As it is not possible for a sensor to have an absolute accuracy that exceeds (or even exactly meets) its reference standard, sound velocity sensors have a generally accepted accuracy of 0.025 m/s. This accuracy specification encompasses the reference fluid’s accuracy limitation plus a bit of ‘wiggle room.’

MEASURING FLIGHT TIME

As the method’s name implies, the time it takes an acoustic pulse to travel over a fixed path length – the flight time – is a key element of time-of-flight sound velocity. Time is measured in nanoseconds to achieve the required precision.

How does the sensor measure time with such precision?

The timing technology behind modern sound velocity sensors is adopted from GPS applications. As would be required for any technology launched into space and expected to provide accurate data for years, the timing technology is extremely precise and stable.

Contrary to popular belief among some CTD manufacturers, CTDs are not used as reference standards during the calibration of sound velocity sensors. Why? Simply put, they aren’t good enough. Why would you use a reference that can only provide accuracy to 0.25 m/s when there is a reference that is ten times more accurate? What is accuracy anyway?

So, which should I use?

For hydrographic surveying, TOF sound speed sensors are the way to go. Beam steering and refraction correction demand highly accurate sound velocity. CTDs can’t compete with the direct measurement of TOF SV for accurate sound speed measurement.


Sound speed profiles obtained with a CTD can result in significant errors. TOF sensors can provide a more accurate picture of the water column, providing better multibeam data.

Another important, but less discussed factor, is robustness. Even if CTD-derived sound velocity data were as accurate as time-of-flight sound velocity, CTDs are generally not suitable for measuring sound speed at the multibeam transducer face. Why? They’re too fragile. The sensing structures of CTDs are typically made of glass or ceramic; far too delicate to withstand the rigors of being installed on the underside of a ship hull. A TOF sound speed sensor, in contrast, is typically made of titanium and carbon fibre.

SEA CHESTS

Most users install their sound velocity probe at the multibeam transducer face, but some prefer to install their probe within a sea chest. This facilitates easy installation and removal, and also protects the probe from the aforementioned impacts to which probes installed on the hull are vulnerable.

Installing your sound speed probe in a sea chest has trade offs, however:

  • The water velocity inside the chest will be different than outside the vessel. This can create a thermal lag between sound speed seen at the sonar acoustic face and that measured by the probe.
  • The water temperature inside the chest is quite often warmer than outside the vessel due to thermal shedding. A small change in temperature will result in a large change in sound velocity.
  • Sensors in a sea chest are more susceptible to fouling due to the reduced flow of water.

Sound speed in sea water is extremely sensitive to temperature. For example, a temperature difference of 0.5°C at an ambient water temperature of 6°C will yield an SV offset of 2 m/s!

There are, however, a few reasonable arguments for using a CTD for water column profiles:

  1. Oceanographic data: If you are collecting data for more than hydrography, you probably need a CTD. Remember, Conductivity, Temperature, and Pressure (Depth) are the parameters that form the foundation from which a long list of characteristics can be calculated. CTD is the basis for all TEOS10 equations.
  2. Continuity: With CTDs having been the best tool for sound velocity measurement for decades before TOF SV instrumentation came along in 1995, continuing to use CTDs allows data to merge with decades of historical data.
  3. Backscatter data: Accurate salinity calculation is required to determine absorption coefficients. Salinity is most often calculated from CTD measurements.

There is one small yet important fact I have not mentioned: We’re not in the ’90s anymore!

Profilers equipped with both CTD and TOF Sound Velocity sensors have been on the market for years now and they become more compact and easier to use with every generation. So even if you do need CTD data for scientific applications or historical continuity, it doesn’t have to be at the expense of hydrographic performance. Use a combined CTD-SV instrument and satisfy all requirements.


Minos•X combined CTD&SVP is known for its rugged performance and ease of use.

1 Chen, C-T, and Millero, F.J. [1977]. Speed of sound in seawater at high pressures. The Journal of the Acoustical Society of America Vol. 62, No. 5, pp. 1129-1135.

2 Bilaniuk, N. and Wong, G. S. K. [1993]. Speed of sound in pure water as a function of temperature. The Journal of the Acoustical Society of America Vol. 93, No. 3, pp. 1609-1612.

Learn how MVP can make a difference for you.

AML’s Moving Vessel Profiler is proven to remove both the technical and financial unpredictability associated with survey operations. With over 130 systems sold, MVP is the market leader in underway profiling systems, and is backed by 20 years of experience and thousands of successful surveys.

SV vs CTD
SV vs CTD Why Your Sound Speed Measurement Method Matters By: Jehan Zouak, Marketing Manager & C...
published on: 2024-09-10 22:24:47
SV vs CTD
2 MVP30-350 Systems fo...
2 MVP30-350 Systems for Geological Survey of Ireland "The MVP is expected to improve productivity ...
published on: 2024-09-10 22:24:42
2 MVP30-350 Systems for Geological Survey of Ireland
20 Cabled UV Biofoulin...
20 Cabled UV Biofouling Control Systems Delivered to Oregon State University “Each cruise is expen...
published on: 2024-09-10 22:24:59
20 Cabled UV Biofouling Control Systems Delivered to Oregon State University
5 Ways to Prepare Your...
5 Ways to Prepare Your MVP for Survey Season By: Darrell Groom, Sales Engineer & Dallace Johnson...
published on: 2024-09-10 22:23:39
5 Ways to Prepare Your MVP for Survey Season
Acoustic Imaging Purch...
Acoustic Imaging Purchases MVP30-350 “Throughout our history Acoustic Imaging has tried to introdu...
published on: 2024-09-10 22:24:11
Acoustic Imaging Purchases MVP30-350
Additional MVP Purchas...
Additional MVP Purchase for Leidos After years of using the Moving Vessel Profiler (MVP) system, Le...
published on: 2024-09-10 22:24:37
Additional MVP Purchase for Leidos
AML Oceanographic Gain...
AML Oceanographic Gains ISO 9001:2015 Certification AML is pleased to announce that the ISO 9001:20...
published on: 2024-09-10 22:24:07
AML Oceanographic Gains ISO 9001:2015 Certification
AML-3 XC: Best of Both...
AML-3 XC: Best of Both Worlds The AML-3 XC is the newest model added to the X2•Series Instrumentatio...
published on: 2024-09-10 22:23:41
AML-3 XC: Best of Both Worlds
Build Up to Breakthrough
Build Up to Breakthrough This is AML: Trajectory By: Robert Haydock, CEO - AML Oceanographic How ...
published on: 2024-09-10 22:23:24
Build Up to Breakthrough
Challenge, Solution, R...
Each cruise is expensive, so we need instruments deployed in the photic zone to last the full ...
published on: 2024-09-10 22:24:56
Challenge, Solution, Results
Conductivity Calibration
Conductivity Calibration AML Oceanographic conductivity cells are calibrated with 6 distinct c...
published on: 2024-09-10 22:24:03
Conductivity Calibration
Culture is Our Competi...
Culture is Our Competitive Advantage This is AML: Culture By: Robert Haydock, CEO - AML Oceanographi...
published on: 2024-09-10 22:23:27
Culture is Our Competitive Advantage
End of Life Notices
End of Life Notices As of June 30, 2021, AML Oceanographic is ending general support including serv...
published on: 2024-09-10 22:24:09
End of Life Notices
Field Trials of AML In...
Field Trials of AML Instruments - Surveying the Squamish Inlet With John Hughes-Clarke from the Ocea...
published on: 2024-09-10 22:25:31
Field Trials of AML Instruments - Surveying the Squamish Inlet
Five Questions about S...
Five Questions about Sensor Accuracy, Answered By: Dustin Olender PhD, Director of Strategic Develop...
published on: 2024-09-10 22:25:03
Five Questions about Sensor Accuracy, Answered
Foul Free at Folger Pi...
Foul Free at Folger Pinnacle UV•Xchange™ Protects Sondes at Ocean Networks Canada's Cabled Observato...
published on: 2024-09-10 22:25:23
Foul Free at Folger Pinnacle
Fugro Germany Marine m...
The MVP System proved itself to be very reliable, robust and relatively easy to operate. The c...
published on: 2024-09-10 22:25:26
Fugro Germany Marine mobilized the Moving Vessel Profiler System (MVP200)
GEOMAR’s MOSES Project...
GEOMAR’s MOSES Project Gains AML Moving Vessel Profiler (MVP) “We are very excited to use the MVP ...
published on: 2024-09-10 22:24:21
GEOMAR’s MOSES Project Gains AML Moving Vessel Profiler (MVP)
How Often Should I be ...
How Often Should I be Taking a Sound Velocity Profile? By: Chris Malzone, VP of Sales & Marketin...
published on: 2024-09-10 22:24:30
How Often Should I be Taking a Sound Velocity Profile?
INFOMAR – Deployment o...
INFOMAR – Deployment of Moving Vessel Profiler For Enhanced Oceanographic and Hydrographic Quality C...
published on: 2024-09-10 22:25:18
INFOMAR – Deployment of Moving Vessel Profiler
Modularity for All
Modularity for All From One Project to the Next By: James Walton, Solutions Engineer & Dallace J...
published on: 2024-09-10 22:23:45
Modularity for All
Monitoring the Canadia...
Monitoring the Canadian Arctic: Easier with AML’s UV Biofouling Control By: Ryan Flagg, Observatory ...
published on: 2024-09-10 22:25:15
Monitoring the Canadian Arctic: Easier with AML’s UV Biofouling Control
MVP200 Selected For Ne...
MVP200 Selected For New Swedish Research Vessel "RV Svea" "Until now we have only been collecting ...
published on: 2024-09-10 22:24:39
MVP200 Selected For New Swedish Research Vessel "RV Svea"
MVP300 Selected For Ne...
MVP300 Selected For New Chinese Icebreaker The Polar Research Institute of China (PRIC) has chosen ...
published on: 2024-09-10 22:24:57
MVP300 Selected For New Chinese Icebreaker
MVP to Augment NSCC’s ...
MVP to Augment NSCC’s Seafloor Mapping Work "The MVP was chosen as it offers industry tried and te...
published on: 2024-09-10 22:24:28
MVP to Augment NSCC’s Seafloor Mapping Work
Orange Is Here! AML La...
Orange Is Here! AML Launches The Latest X•Series Profiling Instruments. (Saanichton, BC) AML Oceano...
published on: 2024-09-10 22:24:10
Orange Is Here! AML Launches The Latest X•Series Profiling Instruments.
Practical Lessons from...
Practical Lessons from the Deep: Establishing Culture as a Competitive Advantage By: Robert Haydock,...
published on: 2024-09-10 22:24:51
Practical Lessons from the Deep: Establishing Culture as a Competitive Advantage
Practical Lessons From...
Practical Lessons From The Deep: Growing An Ocean Tech Company By: Robert Haydock, CEO - AML Oceanog...
published on: 2024-09-10 22:25:07
Practical Lessons From The Deep: Growing An Ocean Tech Company
Pressure Calibration
Pressure Calibration X2•Series instrumentation have thermally compensated pressure sensors. E...
published on: 2024-09-10 22:23:55
Pressure Calibration
Researching the Effect...
Researching the Effects of Climate Change on Forage Fish in the Arctic with Metrec•X By: Jehan Zouak...
published on: 2024-09-10 22:24:34
Researching the Effects of Climate Change on Forage Fish in the Arctic with Metrec•X
Royal Netherlands Navy...
Royal Netherlands Navy Acquires Moving Vessel Profiler (MVP) The new Expeditionary Survey Boat (ESB...
published on: 2024-09-10 22:24:19
Royal Netherlands Navy Acquires Moving Vessel Profiler (MVP)
Service and Calibratio...
Service and Calibration Facility in Europe AML Oceanographic is thrilled to announce our new prese...
published on: 2024-09-10 22:23:22
Service and Calibration Facility in Europe
Six Scenarios Where a ...
Six Scenarios Where a Moving Vessel Profiler (MVP) Saves the Day – Part 1 of 2 By: Darrell Groom, Pr...
published on: 2024-09-10 22:25:10
Six Scenarios Where a Moving Vessel Profiler (MVP) Saves the Day – Part 1 of 2
Sound Velocity Calibra...
Sound Velocity Calibration Sound speed – often referred to as sound velocity – is defined as the ...
published on: 2024-09-10 22:24:06
Sound Velocity Calibration
SV Profiling: How Litt...
SV Profiling: How Little Can You Get Away With? By: Chris Malzone, VP of Sales & Marketing &...
published on: 2024-09-10 22:24:18
SV Profiling: How Little Can You Get Away With?
Temperature Calibration
Temperature Calibration AML’s T•X2change™ temperature sensors are constructed of a precision ag...
published on: 2024-09-10 22:23:59
Temperature Calibration
TerraSond Turns Up Sur...
TerraSond Turns Up Survey Efficiency and Quality with MVP TerraSond has recently deployed a new Mov...
published on: 2024-09-10 22:24:26
TerraSond Turns Up Survey Efficiency and Quality with MVP
Turbidity Calibration
Turbidity Calibration Nephelometric Sensors, Backscatter Sensors, and Transmissometers Suspen...
published on: 2024-09-10 22:23:53
Turbidity Calibration
Upcoming Events in 2022
Upcoming Events in 2022 As the world slowly starts to open up again, so are events and tradesh...
published on: 2024-09-10 22:23:51
Upcoming Events in 2022
Using Kelp Farms to He...
Using Kelp Farms to Help Fish Biodiversity By: Dallace Johnson, Marketing Lead - AML Oceanographic &...
published on: 2024-09-10 22:23:32
Using Kelp Farms to Help Fish Biodiversity
When to be Suspicious ...
When to be Suspicious of an Area’s Sound Velocity Structure By: Chris Malzone, VP of Sales & Mar...
published on: 2024-09-10 22:24:25
When to be Suspicious of an Area’s Sound Velocity Structure
Xiamen University Sele...
Xiamen University Selects Moving Vessel Profiler Xiamen University has purchased a Moving Vesse...
published on: 2024-09-10 22:25:11
Xiamen University Selects Moving Vessel Profiler

AI

Thanks

Our team will be in touch with you in no time!

X